subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Camshaft, Engine|Specifications|Page 989 > < Camshaft, Engine|Specifications|Page 987
Page 2
background image

11. Remove oil seal.
12. Remove plug from rear side of camshaft.

CAUTION:  
^

Do not remove oil seal unless necessary.

^

Do not scratch journal surface when removing oil seal.

B: INSTALLATION

1. Apply a coat of engine oil to camshaft journals and install camshaft.
2. Install camshaft cap.

a. Apply liquid gasket on the around of camshaft cap.

Liquid gasket:

THREE BOND 1280B
PINK 0877YA018

NOTE:  Apply a coat of 3 mm (0.12 inch) dia. liquid gasket along edge of cam cap mating surface.

b. Temporarily tighten bolts (g) through (j) in alphabetical sequence.

c. Install valve rocker assembly.

Camshaft, Engine|Specifications|Page 989 > < Camshaft, Engine|Specifications|Page 987