subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Fuel Supply Line|Service and Repair|Page 2685 > < Fuel Supply Line|Service and Repair
Page 2
background image

8. Separate the quick connector on the fuel delivery and return line.

1. Clean the pipe and connector, if they are covered with dust.
2. Hold the connector (A) and push retainer (B) down.
3. Pull out the connector (A) from retainer (B).

CAUTION:  Replace retainer with new ones.

INSTALLATION

1. Connect the quick connector on fuel delivery line.

CAUTION:
-

Always use a new retainer.

-

Make sure that the connected portion is not damaged or has dust. If necessary, clean seal surface of pipe.

1. Set the new retainer (B) to connector (A).
2. Push the pipe into the connector completely.

NOTE:  At this time, two clicking sounds are heard.

Fuel Supply Line|Service and Repair|Page 2685 > < Fuel Supply Line|Service and Repair