Impreza L Sedan F4-2.2L SOHC (1997)
Slip ring outer diameter:
Standard: 22.7 mm (0.894 in)
Limit: 22.1 mm (0.870 in)
3. Continuity test
Check resistance between slip rings using circuit tester. If the resistance is not within specification replace rotor assembly.
Specified resistance:
Approx. 3 Ohm (A2T39091)
4. Insulation test
Check continuity between slip ring and rotor core or shaft. If continuity exists, the rotor coil is short-circuited, and so replace rotor assembly.
5. Ball bearing (rear side)
1. Check rear ball bearing. Replace if it is noisy or if rotor does not turn smoothly.
2. The rear bearing can be removed by using common bearing puller.
3. STATOR