subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Rear Crossmember|Page 3948 > < Rear Crossmember
Page 2
background image

5. Remove bolts securing crossmember to car body, and remove crossmember.
6. Scribe an alignment mark on rear lateral link cam bolt and crossmember.
7. Remove front and rear lateral links by loosening nuts.

INSPECTION  

Check removed parts for wear, damage and cracks, and correct or replace if defective.

INSTALLATION 

1. Install in reverse order of removal. 
2. Install rear differential.  
3. Always tighten rubber bushing location when wheels are in full contact with the ground and vehicle is curb weight.

NOTE:  Check wheel alignment and adjust if necessary.

Rear Crossmember|Page 3948 > < Rear Crossmember