Impreza L Sedan F4-2.2L SOHC (1997)
Wheel Bearing: Service and Repair
Front
TOOL REQUIRED
-
ST1 927060000 Hub Remover
-
ST2 927080000 Hub Stand
-
ST1 927400000 Housing Stand
-
ST2 927100000 Bearing Remover
-
ST1 927410000 Oil Seal Installer
-
ST2 927120000 Hub Installer
-
Or Equivalent
DISASSEMBLE
1. Remove Knuckle. Refer to Steering and Suspension.
2. Using ST1, support housing and hub securely.
3. Attach ST2 to housing and drive hub out. If inner bearing race remains in the hub, remove it with a suitable tool (commercially available).
CAUTION:
^
Be careful not to scratch polished area of hub.
^
Be sure to install inner race on the side of outer race from which it was removed.