Impreza L Sport Wagon AWD F4-2.2L SOHC (2001)
Shifter A/T: Service and Repair
Disassembly and Assembly
C: DISASSEMBLY
1. Remove connector from plate.
2. Remove indicator light and two screws.
3. Remove retainer spring, then pull up select lever grip with indicator cover for holding select lever button.
CAUTION: Pull the select lever grip carefully so that the select lever button may not jump out.
4. Remove shift-lock solenoid and "P" position switch.
5. Remove cap and clip, then extract pin.
6. Remove select lever lower then take away select lever upper from plate.
D: ASSEMBLE
1. Clean all parts before assembly.
2. Apply grease [NIGTIGHT LYW No. 2 or equivalent] to each parts.
3. Assemble in the reverse order of disassembly.
4. After completion of fitting, transfer select lever to range "P" - "1", pressing the button of the grip; then check whether the indicator and select lever
agree, whether the pointer and position mark agree and what the operating force is.