subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Front Seat|Page 4392 > < Front Seat|Page 4390
Page 1
background image

Seats: Service and Repair
Rear Seat

REMOVAL

1. Remove bolts securing hinges (located at front of seat) to body.
2. Pull strap (located in middle rear portion of cushion) to release lock. Lift cushion out and away from body.
3. Pull knobs (located at each side of backrest's upper portion) up to release lock, and fold backrest all the way forward.

4. Remove screws which secure overlapped portions of luggage compartment mat and mat directly behind backrest.
5. Roll up mat (located at rear of left backrest) and remove the bolt which secures center hinge to backrest.

6. Tilt left backrest forward until striker engages with lock, and remove the bolt which secures side hinge to body.
7. Pull knob up until left backrest lock is released. Slide backrest forward and away from body. 
8. Remove the bolt which secures center hinge of right backrest to body.
9. Pull knob up until right backrest lock is released. While tilting backrest forward, remove hinge pin from hole in bracket, and remove backrest and

away from body.

INSTALLATION

Front Seat|Page 4392 > < Front Seat|Page 4390