Alignment: Specifications (page 2 of 10)
- Make
- Subaru
- Model
- Impreza WRX F4-
- Engine
- 2.0L DOHC Turbo
- Year
- 2004
- Section
- Alignment
MaintenanceSpecifications · page 2 of 10
Alignment: Service and Repair
Wheel Alignment
INSPECTION
Check, adjust and/or measure wheel alignment in accordance with procedures indicated in figure:
WHEEL ARCH HEIGHT
1. Adjust the tire pressure to specifications.
2. Set the vehicle under "curb weight" conditions. (Empty luggage compartment, install spare tire, jack, service tools, and top up fuel tank.)
3. Set the steering wheel in a wheel-forward position.
4. Suspend a thread from wheel arch (point "A" in figure below) to determine the point directly above center of spindle.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2004 Subaru Impreza 2.0L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Subaru power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.