Impreza WRX STI F4-2.5L Turbo (2008)
2. WHEN USING PIANO WIRE
CAUTION:
-
Do not tightly pull the piano wire against the windshield glass edge.
-
Apply protective tape, etc, and be careful that the inner and outer components of the vehicle are not damaged.
-
Do not cross piano wires. Otherwise they may be cut.
1. Remove the passenger side front pillar trim, and disconnect the wiper deicer connector. (Model with wiper deicer)
2. Remove the cowl panel.
3. Remove the glass molding.
4. Tape the body side of the circumference of windshield glass for protection.
5. Make a hole in the adhesive part using drill or cutter knife.
6. Pass the piano wire through the hole, and attach both the wire ends securely to pieces of wood.
