Legacy F4-2.5L DOHC Turbo (2005)
procedures again from the beginning.
13. Push the release lever until operating cylinder push rod retracts. Ensure that the clutch fluid level in reservoir tank increases. If the clutch fluid
level increases, hydraulic clutch is properly adjusted; if the fluid level does not increase or push rod does not retract, replace the master cylinder
with a new one.
14. Push the release lever until the operating cylinder push rod retracts. Check that the clutch fluid level in reservoir tank increases.
15. If the clutch fluid level increases, hydraulic clutch play is correct.
16. If the clutch fluid level does not increase or push rod does not retract, clutch pedal must be readjusted.
17. Check the fluid level on the outside of the reservoir tank. If the level is below MIN, add clutch fluid to bring it up to MAX.
Recommended clutch fluid: FMVSS No. 116, fresh DOT 3 or DOT 4 brake fluid