Legacy F4-2.5L SOHC (2003)
^
A list of the support data is shown in the following table.
NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
CLEAR MEMORY MODE
1. On the <<Main Menu,, display screen, select {2. Each System Check} and press the <<YES>> key.
2. On the <<System Select Menu>> display screen, select {Brake System} and press the <<YES>> key.
3. Press the <<YES>> key after the engine type is displayed.
4. On the <<Brake Control Diagnosis>> display screen, select {Clear Memory} and press the <<YES>> key.
5. When 'Done' and turn ignition switch OFF' are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
FUNCTION CHECK
Without Subaru Select Monitor
Clear Memory Mode
OPERATION
WITHOUT SUBARU SELECT MONITOR