Legacy F4-2.5L SOHC (2003)
Power Steering Pump: Service and Repair
Disassembly and Assembly
DISASSEMBLY
NOTE: Oil pump for 3.0 L model cannot be disassembled. If the oil pump is malfunctioning, replace the oil pump as an assembly.
1. Using ST, place oil pump in a vise and remove four bolts which secure rear cover.
ST 341 99AE020 ATTACHMENT
2. Remove pressure plate.
3. Using a screwdriver, pry retaining ring off.
CAUTION: Do not remove cam ring, rotor, etc.
4. Install pressure plate.
5. Temporarily install rear cover to front casing.
6. Remove oil pump pulley.
7. Place oil pump in a vise.
CAUTION: Do not place oil pump directly in the vise, use soft pads and hold oil pump lightly to protect the pump.