Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
Tightening torque: 39 ± 5 Nm (4.0 ± 0.5 kg-m, 28.9 ± 3.6 ft. lbs.)
4. Tighten bolt A.
Tightening torque: 13 ± 3 Nm (1.3 ± 0.3 kg-m, 9.4 ± 2.2 ft. lbs.)
5. Temporarily connect pipes C and D to pipes (on the gearbox side).
6. Temporarily install clamp E on pipes C and D.
CAUTION: Ensure that the letter "8" on each clamp are diagonally opposite each other as shown in figure.
7. Tighten clamp E firmly.
Tightening torque: 7.4 ± 2.0 Nm (0.75 ± 0.20 kg-m, 5.4 ± 1.4 ft. lbs.)
8. Tighten joint nut.
Tightening torque: 15 ± 5 Nm (1.5 ± 0.5 kg-m, 10.8 ± 3.6 ft. lbs.)
9. Connect pipes A and B to four pipe joints of gearbox. Connect upper pipe B first, and lower pipe A second.
Tightening torque: 13 ± 3 Nm (1.3 ± 0.3 kg-m, 9.4 ± 2.2 ft. lbs.)
10. Install jack-up plate.
11. Connect battery minus terminal.