Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
![background image](/subaru/legacy_brighton_wagon_awd/f4-2.5l_sohc/Page-851003.png)
9) Remove four bolts from rear arm.
10) Remove hub unit bearing. If it is hard to remove, use STs.
ST1 926470000 AXLE SHAFT PULLER
ST2 927140000 PLATE
CAUTION: Be careful not to damage tone wheel.
B: DISASSEMBLY
1) Using ST, remove hub unit from hub assembly.
CAUTION: Securely set hub assembly so that it does not lean. ST 398507703 DUMMY COLLAR