Legacy Outback Ltd Sedan AWD F4-2.5L SOHC (2001)
CAUTION: Never start the engine before feeding the fluid; otherwise vane pump might be seized up.
DISASSEMBLY
1. Using ST, place oil pump in a vise and remove four bolts which secure rear cover.
ST 34199AE020 ATTACHMENT
2. Remove pressure plate.
3. Using a screwdriver, pry retaining ring off.
CAUTION: Do not remove cam ring, rotor, etc.
4. Install pressure plate.
5. Temporarily install rear cover to front casing.
6. Remove oil pump pulley.
7. Place oil pump in a vise.