Legacy Sedan 2WD F4-2.2L SOHC (1990)
Inhibitor Switch Testing
CHECK ECU VOLTAGE
With ignition "ON," measure voltage between ECU connector terminal and ground as follows:
Connector & terminal:
Voltage: [1]
(B58)9-Ground
0V ("P" range)
(B58)9-Ground
8V min. (all except "P" range)
CHECK INHIBITOR SWITCH
1.
Disconnect transmission connectors.
2.
Measure resistance between inhibitor switch terminals while shifting select lever from "N" to any other position:
Connector & terminal:
Resistance:
(E15)3-(E15)4
0 Ohms ("P" range)
1M Ohms min. (all except "P" range)
CHECK HARNESS BETWEEN ECU AND INHIBITOR SWITCH
1.
Disconnect ECU and inhibitor switch connectors.
2.
Measure resistance between ECU and inhibitor switch connectors and ground as follows:
Connector & terminal:
Resistance:
(B58)9-(B15)3
0 Ohms
(B15)3-Ground
1M Ohms min.
(B15)4-Ground
0 Ohms