Legacy Sedan 2WD F4-2.2L SOHC (1990)
Neutral Safety Switch: Adjustments
1.
Disconnect battery ground cable.
2.
Detach cable from select lever.
3.
Remove three inhibitor switch to transmission retaining bolts.
4.
Disconnect switch electrical connector and remove inhibitor switch.
5.
Install new inhibitor switch and lightly install retaining bolts.
6.
Adjust switch as follows:
a. Ensure select lever is set in the N position.
b. Insert stopper pin, tool No. 499267300, into the inhibitor switch lever and switch body.
c. Torque retaining bolts to 3 ft. lbs., then remove the stopper pin.
d. Attach cable to select lever, then check for proper operation.