Legacy Sedan 4WD F4-2.2L SOHC (1992)
11. Using Hub Installer (927120000) or equivalent, press bearing into hub by driving inner race.
Installation
1. Connect damper strut and housing, torque the two mount bolts to 132 - 162 Nm (98 - 119 ft.lbs).
2. On ABS equipped vehicles, install speed sensor on housing.
3. On ABS equipped vehicles, install the speed sensor on the strut bracket and torque to 20 - 39 Nm (14 - 29 ft.lbs).
4. Install transverse link ball joint to housing and torque to 30 - 50 Nm (28 - 37 ft.lbs).
5. Install tie-rod end ball joint on housing knuckle arm and torque to 25 - 29 Nm (18 - 22 ft.lbs).
6. Install disc rotor on hub.
7. Install disc brake caliper on housing, torque to 49 - 69 Nm (36 - 51 ft.lbs).
8. Install front drive shaft.