Legacy Sedan 4WD F4-2.2L SOHC (1992)
1. Connect rear housing assembly and strut assembly, torque mount bolts to 132 - 162 Nm (98 - 119 ft.lbs).
2. On ABS equipped vehicles, install rear speed sensor to back plate.
3. Fit BJ (Bell Joint) to rear housing splines taking care not to damage the inner oil seal lip.
4. Using Drive Shaft Installer (9224310000), Extension (927130000), and Adapter (927390000), install BJ into place.
5. Install new axle nut and temporarily tighten the BJ.
6. Install DOJ on rear differential spindle and drive new spring pin into place.