Legacy Sedan 4WD F4-2.2L SOHC (1992)
7. Using a new self-locking nut, connect rear housing assembly to trailing link assembly. Torque to 98 - 127 Nm (72 - 94 ft.lbs).
8. Using a new self-locking nut, connect rear housing assembly to lateral link assembly. Torque to 118 - 157 Nm (87 - 116 ft.lbs).
9. Install disc rotor on rear housing assembly.
10. Install disc brake assembly on rear housing assembly. Torque to 46 - 58 Nm (34 - 43 ft.lbs).
11. Bleed air from brake system.
12. Connect parking brake cable to disc brake assembly.
13. Move brake lever back to apply brakes. While depressing brake pedal, tighten axle nut using a socket wrench. Torque to 167 - 206 Nm (123 - 152
ft.lbs) and lock axle nut.
14. Install wheel and wheel cap. Torque to 78 - 98 Nm (58 - 72 ft.lbs).
15. Lower vehicle to ground and connect the ground cable to the battery.