Legacy Wagon 4WD F4-2.5L DOHC (1996)
2) Turn adjusting bolt head until toe-in is at the specification.
NOTE: When left and right wheels are adjusted for toe-in at the same time, the movement of one scale graduation changes toe-in by
approximately 3 mm (0.12 in).
3) lighten self-locking nut.
Tightening torque:
98 ± 15 N.m (10 ± 1.5 kg-m, 72 ± 11 ft-lb)
6. Thrust Angle
6. THRUST ANGLE
-
Inspection
1) Position vehicle on a level surface.
2) Move vehicle 3 to 4 meters directly forward.
3) Determine locus of both front and rear axles.
4) Measure distance "L" between center line of loci of the axles.
<For reference>
-
Thrust angle is less than 20' when "L" is equal to or less than 15 mm (0.59 in).
-
Adjustment
Make thrust angle adjustments by turning toe-in adjusting bolts of rear suspension equally in the same direction.
NOTE: On FWD models, turn adjusting wheels one by one, by the some amount in the opposite direction of the adjusting bolts.