Loyale Sedan (4 Door) 2WD F4-1781cc 1.8L SOHC Turbo (1990)
_2wd/f4-1781cc_1.8l_sohc_turbo/Page-1369002.png)
^
The connector is scratched, cracked, deformed, or damaged in any manner.
^
The control module is dropped to the floor or ground.
^
The control module had been determined to be faulty during self-diagnosis.
MAIN HARNESS
INSPECTION STANDARD
^
The vehicle is damaged in a collision regardless of whether or not the airbag deployed; or
^
The designated trouble code is outputted during self-diagnosis Please refer to the diagnostics section in the appropriate service manual for further
information.
REPLACE THE MAIN HARNESS IF ONE OR MORE OF THE FOLLOWING CONDITIONS EXIST:
^
Harness circuit is broken, wire core is exposed, corrugated tubing is cracked, etc.
^
Connector is scratched, cracked, deformed, or damaged in any manner.
^
The designated trouble code is output during self-diagnosis. Please refer to the diagnostics section in the appropriate service manual for further
information.
COMBINATION SWITCH & ROLL CONNECTOR
INSPECTION STANDARD
^
The vehicle is damaged in a collision, regardless of whether or not the airbag deployed; or
^
The designated trouble code is outputted during self-diagnosis. Please refer to the diagnostics section in the appropriate service manual for further
information.
REPLACE THE COMBINATION SWITCH & ROLL CONNECTOR IF THE FOLLOWING CONDITION EXISTS:
^
The combination switch or steering roll connector is cracked, deformed, or damaged in any manner.
STEERING WHEEL
INSPECTION STANDARD
^
The vehicle is damaged in a collision, regardless of whether or not the airbag deployed.
REPLACE THE STEERING WHEEL IF ONE OR MORE OF THE FOLLOWING CONDITIONS EXIST:
^
The steering wheel is cracked, deformed, or damaged in any manner.
^
Ensure that the new airbag module fits properly in the steering wheel when installed.
^
After installing the airbag module, ensure that it is free of interference with the steering wheel.
Also, clearance between all points should be equal.
STEERING COLUMN ASSEMBLY
INSPECTION STANDARD
^
The vehicle is damaged in a collision, regardless of whether or not the airbag deployed.
REPLACE THE STEERING COLUMN ASSEMBLY IF ONE OR MORE OF THE FOLLOWING CONDITIONS EXIST:
^
Ensure that the steering wheel free play, in axial and radial directions, is within specifications. Please refer to the diagnostics section in the
appropriate service manual for further information.
^
Ensure that the clearance between the steering column bracket and capsule is within specifications Please refer to the diagnostics section in the
appropriate service manual or SUBARU service bulletin number 17-01-92 (which can be found in the SERVICE BULLETIN MANUAL AND
SERVICE HELPLINE PUBLICATIONS UPDATE SUPPLEMENT, Volume Number 14), item 4, for further information.
SIDE AIRBAG MODULE (DRIVER'S AND/OR PASSENGER'S, IF APPLICABLE)
INSPECTION PROCEDURE:
^
The vehicle is damaged in a collision, regardless of whether or not the airbag deployed; or
^
The designated trouble code is outputted during self diagnosis. Please refer to the diagnostics section in the appropriate service manual for further
information.
