Loyale Sedan (4 Door) 2WD F4-1781cc 1.8L SOHC Turbo (1990)
_2wd/f4-1781cc_1.8l_sohc_turbo/Page-1369003.png)
REPLACE THE SIDE AIRBAG MODULE IF ONE OR MORE OF THE FOLLOWING CONDITIONS EXIST:
^
The Airbag is deployed.
^
The pad surface is scratched, cracked, deformed, or damaged in any manner.
^
The harness and/or connector is cracked or deformed, their circuits are broken, wire core is exposed, etc.
^
The mounting bracket is cracked, deformed, or damaged in any manner.
^
The mounting surface has been fouled with a foreign matter such as oil, grease, water, cleaning solvent, etc.
^
The airbag module has been dropped to the floor or ground.
^
The airbag module had been determined to be faulty during self-diagnosis.
SIDE AIRBAG SENSOR (DRIVER'S AND/OR PASSENGER'S, IF APPLICABLE)
INSPECTION STANDARDS:
^
Check the side section of the vehicle for damage, regardless of whether or not the airbag deployed; or
^
The designated trouble code is outputted during self-diagnosis. Please refer to the diagnostics section in the appropriate service manual for further
information.
REPLACE THE SIDE AIRBAG SENSOR(S) IF ONE OR MORE OF THE FOLLOWING CONDITIONS EXIST:
^
Airbag is deployed.
^
Bracket is cracked, deformed, or damaged in any manner.
^
The housing is cracked, deformed, or damaged in any manner.
^
The label that identifies the manufacturing number is peeling off or deteriorated.
^
Harness circuit is broken, wire core is exposed, etc.
^
Sensor is dropped to the floor or ground.
^
Sensor had been determined to be faulty during self-diagnosis.
SEAT BELT PRE-TENSIONERS (DRIVER'S AND/OR PASSENGER'S)
INSPECTION PROCEDURE:
^
The vehicle is damaged in a collision, regardless of whether or not the airbag deployed; or
^
The designated trouble code is outputted during self diagnosis. Please refer to the diagnostics section in the appropriate service manual for further
information.
REPLACE THE SEAT BELT PRE-TENSIONER(S) IF ONE OR MORE OF THE FOLLOWING CONDITIONS EXIST:
^
Airbag is deployed (if front airbags are deployed, the front seatbelt pre-tensioners have also discharged)
^
Bracket is cracked, deformed, or damaged in any manner.
^
The housing is cracked, deformed, or damaged in any manner.
^
The label that identifies the manufacturing number is peeling off or deteriorated.
^
Harness circuit is broken, wire core is exposed, etc.
^
The belt webbing is extended and will not retract.
^
Pre-tensioner is dropped to the floor or ground.
^
The pre-tensioner has been determined to be faulty during self-diagnosis.
