Outback F4-2.5L (2008)
Holding the connector, push it in securely until a clicking sound is heard.
CAUTION:
-
Do not touch the outer side section or else the outer side (A) will move back.
-
Be sure to insert the connector in until it is locked. Then pull it lightly to make sure that it is locked.
6. PASSENGER DETECTION SYSTEM (BETWEEN AIRBAG REAR HARNESS AND SEAT HARNESS) AND BELT TENSION
SENSOR
1. How to disconnect:
Push lock arm (A), then disconnect the connector.
CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
2. How to connect:
Holding the connector, push it in securely until a clicking sound is heard.
CAUTION: Be sure to insert the connector in until it is locked. Then pull it lightly to make sure that it is locked.
