subaru Workshop Repair Guides

Subaru Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 3
background image

ADJUSTMENT 

1) Loosen the lock nut of clutch switch (clutch start).

2) Fully depress the clutch and hold it.
3) Adjust the gap of the clutch pedal plate and the clutch switch to be 2 - 2.5 mm (0.08 - 0.10 in).

4) Tighten the lock nut.
Tightening torque: 8 N-m (0.8 kgf-m, 5.8 ft-lb)

Starting and Charging > Sensors and Switches - Starting and Charging > Clutch Switch > Component Information > Service and Repair > Page 4263

< PREV PAGE NEXT PAGE >