Outback F4-2.5L (2008)
Neutral Safety Switch: Testing and Inspection
Inhibitor Switch
NOTE
1. 4AT MODEL
For the inhibitor switch, refer to 4AT section. <Ref. to 4AT-47, INSPECTION, Inhibitor Switch.>
2. 5AT MODEL
Inhibitor switch cannot be removed and checked, because the inhibitor switch is installed on control valve assembly.
When a malfunction occurs, refer to 5AT (diag) section. <Ref. to 5AT(diag)-34, DTC P0705 TRANSMISSION RANGE SENSOR CIRCUIT
(PRNDL INPUT), Diagnostic Procedure with Diagnostic Trouble Code (DTC).>