Outback F4-2.5L SOHC (2005)
5) Fill the three holes aside from the bolt holes in the transmission case, with liquid gasket.
Liquid gasket: THREE BOND 1217B (Part No. K0877YA020) or equivalent
6) Install the oil pan by equally tightening the bolts.
Tightening torque: 5 N.m (0.5 kgf-m, 3.7 ft-lb)
7) Fill AIF from the oil charge pipe.
Capacity: Fill with the same amount of ATF as drained.
8) Bleed the air of control valve.
9) Check the ATF level.
C: INSPECTION
Check the control valve strainer for holes, damages or adhesion of dust and other foreign particles.