Outback F4-2.5L SOHC (2005)
other points for oil leakage.
4. Deflection on facing: If deflection exceeds the specified value at the outer circumference of facing, replace the clutch disc.
ST 499747100 CLUTCH DISC GUIDE
Limit for deflection:
Turbo model 1.0 mm (0.039 inch) at R = 110 mm (4.33 inch)
Non-turbo model 0.7 mm (0.027in) at R= 110mm (4.33 inch)
5. If the spline wears, rivets loosen and damper spring is failure, replace the clutch disc.
CLUTCH COVER
NOTE: Visually check the following items without disassembling, and replace or repair if defective.
1. Loose thrust rivet
2. Damaged or worn bearing contact area at the center of diaphragm spring
3. Damaged or worn disc contact surface of pressure plate
4. Loose strap plate installation area