Outback F6-3.0L (2003)
CAUTION:
^
If cable clamp is damaged, replace it with a new one.
^
Never fail to cover outer cable end with boot.
^
Be careful not to kink accelerator cable.
^
Always use new clevis pins.
2. Adjustment of clutch pedal.
3. Inspect after pedal installation.
DISASSEMBLY
MT MODEL
1. Remove the brake switch.
2. Remove the clutch pedal.
3. Remove the clutch master cylinder bracket.
4. Remove bushing, spring and stopper.
5. Remove the brake pedal pad.
AT MODEL
1. Remove the brake switch.
2. Unbolt, and then remove the brake pedal.