Outback L.L.Bean Edition AWD F6-3.0L (2002)
Rear Door Window Motor: Service and Repair
Rear Regulator and Motor Assembly
REMOVAL
1. Remove door trim. <Ref. to REMOVAL, Rear Door Trim.>
2. Remove sealing cover. <Ref. to REMOVAL, Rear Sealing Cover.>
3. Remove door glass. <Ref. to REMOVAL, Rear Door Glass.>
4. Secure bolts using screwdriver to remove front sash adjusting nut.
5. Remove front sash.
6. Disconnect electrical connector.
7. Loosen four bolts and two nuts to remove regulator assembly.
8. Loosen screws to remove motor assembly.
INSTALLATION
1. Install in the reverse order of removal.
2. Adjust rear door glass. <Ref. to ADJUSTMENT, Rear Door Glass.>
Tightening torque:
Refer to COMPONENT in General Description <Ref. to REAR DOOR GLASS, COMPONENT, General Description.>
