Transmission Cooler Pipe and Hose Replacement
Transmission Cooler: Service and Repair
ATF Cooler Pipe and Hose
REMOVAL
1. 2.5L MODEL
1. Remove battery and washer tank.
2. Lift-up the vehicle.
3. Drain ATF completely.
NOTE: Tighten ATF drain plug after draining ATF.
Tightening torque: 25 Nm (2.5 kgf-cm, 18.1 ft. lbs.)
4. Remove the under cover.
5. Disconnect ATF cooler hose from radiator.
NOTE:
^
Do not remove with a screwdriver or other pointed tools.
^
When the hose is difficult to remove, wrap a shop cloth around the hose to protect it. Turn it with pliers, and then pull directly out with
your hand.
6. Disconnect ATF cooler hoses from pipes.
NOTE:
^
Do not remove with a screwdriver or other pointed tools.
^
When the hose is difficult to remove, wrap a shop cloth around the hose to protect it. Turn it with pliers, and then pull directly out with
your hand.