Outback VDC Wagon AWD F6-3.0L (2002)
7. Remove ATF cooler pipe from frame.
8. Remove the oil cooler inlet and outlet pipes.
NOTE: When removing outlet pipe, be careful not to lose ball and spring used with retaining screw.
2. 3.0L MODEL
1. Remove battery and washer tank.
2. Lift-up the vehicle.
3. Drain ATF completely.
NOTE: Tighten ATF drain plug after draining ATF.
Tightening torque: 25 Nm (2.5 kgf-cm, 18.1 ft. lbs.)