Outback VDC Wagon AWD F6-3.0L (2002)
^
Attach a cloth to the end of driven shaft to prevent damage.
^
When press fitting, align oil holes of shaft and bushing.
ST1 499277200 INSTALLER
ST2 499587000 INSTALLER
5. Install 2nd driven gear, inner baulk ring, synchro cone, outer baulk ring and insert onto driven shaft.
6. After installing key on driven shaft, install 3rd 4th driven gear using ST and press.
CAUTION: Do not apply pressure in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).
NOTE: Align groove in baulk ring with insert.
ST 499277200 INSTALLER
7. Install a set of roller bearings onto the driven shaft using ST and press.
CAUTION: Do not apply pressure in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).
ST 499277200 INSTALLER