Tribeca F6-3.6L (2008)
2) Install the support to the housing.
Tightening torque: 120 N-m (12.2 kgf-m, 88.5 ft-lb)
3) Apply a thin coat of Molykote M7439 (Part No. K0770YA000) to the pad clip.
4) Apply a thin coat of Molykote AS880N (Part No. K0777YA010) to the contact surface between pad and inner shim.
5) Apply a thin coat of Molykote AS880N (Part No. K0777YA010) to the three contact surfaces between inner shim and outer shim of outer pads.
6) Install the pad to support.
NOTE: Install the pad indicator in proper direction.