Tribeca F6-3.6L (2008)
CAUTION:
^
Be sure to install so that the pad return spring faces the input side of the direction of brake rotor rotation, as shown in the figure.
^
Correctly install the pad return spring to the supporting surface of the pad clip as shown in the figure.
^
If the pad return spring is deformed or damaged, replace the brake pad.
7) Install the caliper body to the support.
Tightening torque: 27 N-m (2.8 kgf-m, 19.9 ft-lb)
8) Connect the brake hose using a new brake hose gasket.
Tightening torque: 18 N-m (1.8 kgf-m, 13.0 ft-lb)
9) Bleed air from the brake system.
Rear
Rear Disc Brake Assembly
REMOVAL
CAUTION: Do not allow brake fluid to come in contact with vehicle body. If it does, wash off with water and wipe away completely.
1) Lift up the vehicle, and then remove the rear wheels.
2) Disconnect the brake hose from caliper body assembly.
