Alignment: Specifications (page 4 of 9)

Make

Subaru

Model

Tribeca F6-

Engine

3.6L

Year

2008

Section

Alignment

Steering and SuspensionSpecifications · page 4 of 9

2. Loosen the two self-locking nuts located at the lower front section of the strut.

NOTE:  When the adjusting bolt needs to be loosened or tightened, hold its head with a wrench and turn the self-locking nut.

3. Turn the camber adjusting bolt so that the camber is set at specification.

NOTE:  Moving the adjusting bolt by one scale changes the camber by approximately 0°15'.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

10 Steering & suspension

The same page in: Tribeca F6-3.6L (2008).