subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Brake Pad|Service and Repair > < Brakes - Brake Pad Rust Prevention|Page 2670
Page 1
background image

Brake Pad: Technical Service Bulletins
Brakes - Disc Pad Service

NUMBER 
06-23-93

DATE
01-12-93

APPLICABILITY
ALL SUBARU MODELS

SUBJECT:
DISC BRAKE SERVICING

The disc brake system used on vehicles today are designed and developed to meet many different but very strict requirements while providing the
optimum level of performance under a wide range of vehicle operating conditions.

The choice of brake pads is ultimately a balanced choice. As a result, a certain amount of brake noise can result. The pads used on today's vehicles may
cause an occasional and intermittent high-pitched squeak or squeal when brakes are applied with light or moderate pedal pressure. If the brake system is
confirmed to be functioning correctly, the customer should be assured that this is an operating characteristic of disc brakes and no repair should be
attempted.

Efforts to completely eliminate the occasional and intermittent noises that are judged to be normal, are frequently temporary. All brake noises should not
arbitrarily be considered normal, however. They should be diagnosed as outlined in the appropriate model year service manual. An example of a similar
noise requiring corrective action is the constant high-pitched squeal that is emitted by the disc brake wear warning sensor when brake pads are
excessively worn.

Brake Pad|Service and Repair > < Brakes - Brake Pad Rust Prevention|Page 2670