XT-6 2WD L6-2.7L SOHC (1989)
Piston: Service and Repair
1.
Disconnect distributor electrical connections, then remove distributor mounting bolts and distributor.
2.
Loosen water pump pulley attaching bolts, then remove drive belt and alternator.
3.
Disconnect hoses, lines and electrical connections, then remove intake manifold attaching bolts and the intake manifold.
4.
Remove alternator mounting bracket, then the PCV connector and harness clamp.
5.
Remove oil filler duct and water pipe.
6.
Lock flywheel or driveplate with suitable tool to prevent crankshaft rotation, then remove crankshaft pulley attaching bolt and the crankshaft
pulley.
7.
Remove water pump pulley and cover, then the oil dipstick and tube.
8.
Remove timing belts and covers as outlined previously.
9.
Remove water pump together with hose.
Fig. 25 Exploded View Of Crankcase & Oil Pump
10.
Remove oil pump mounting bolts, then the oil pump together with filter, Fig. 25.
11.
Remove oil pump outer rotor from crankcase.
