XT-6 2WD L6-2.7L SOHC (1989)
Evaporator Core: Service and Repair
Disassembly and Assembly
Evaporator Disassembly & Assembly
1. Using a flat-bladed screwdriver, remove the clamps and the evaporator upper case.
2. Remove thermostat from upper case. (Thermistor is inserted into specified evaporator fin position.) When installing thermostat, be sure to insert
thermistor into specified fin position.
3. Disconnect the connection between the expansion valve and pipe from receiver drier.
4. Remove the expansion valve from pipes.
5. To install expansion valve, reverse removal procedures. Properly wrap capillary tube of expansion valve with seal.
Tightening torque: Nm (kg-m, ft-lb)