XT-6 2WD L6-2.7L SOHC (1989)
Timing Belt: Service and Repair
Installation
1. Install belt tension adjuster.
-
Remove plug screw from belt tension adjuster lower side.
-
Insert a standard screwdriver into the hole in the bottom of belt tension adjuster. Turn the screw clockwise to compress rubber boot. Then
install BELT ADJUSTER STOPPER (13082AA0000).
Note: The clip furnished as a spare part can be used in place of BELT ADJUSTER STOPPER.
-
Using a syringe, add engine oil through air vent hole on top of rubber boot until it overflows.
-
Install plug screw.
Note: Be sure to use a new plug screw gasket.