XT-6 2WD L6-2.7L SOHC (1989)
Steering Wheel: Service and Repair
1.
On models with airbags, disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2.
Remove airbag module as outlined under BODY ELECTRICAL SAFETY AND ENTERTAINMENT/PASSIVE RESTRAINTS, AIR BAG
section.
3.
On all models, disconnect negative battery cable.
4.
Remove steering wheel trim pad.
5.
Mark steering wheel for reference during assembly.
6.
Remove steering wheel retaining nut.
7.
Using a suitable puller, separate steering wheel from steering shaft.
8.
Reverse procedure to install.
