Aerio L4-2.3L (2006)
3. Disconnect air bag (inflator) module or seat belt pretensioner connector as follows.
a. For driver air bag (inflator) module Disconnect contact coil connector (1) located near base of steering column.
b. For passenger air bag (inflator) module Remove glove box from instrument panel and disconnect passenger air bag (inflator) module connector
(2).
c. For side air bag (inflator) module Disconnect side air bag (inflator) module connectors (3) under front seat cushion.
d. For seat belt pretensioners (right and left) Remove both side (driver and passenger side) center pillar lower trim and disconnect seat belt
pretensioner connectors (4).
4. Confirm that each air bag (inflator) module and/or seat belt pretensioners is securely mounted.
5. Check that there is no open, short or damage in special tools (deployment harness (A), adapter cable (B) and (C)). If any faulty condition is found,
do not use it and be sure to use new special tool. And connect adapter cable (B) or (C) to deployment harness (A) and lock connectors with lock
slider.
Special Tool
(A): 09932-75031
(B): 09932-77310
(C): 09932-78332