Aerio L4-2.3L (2006)
-
SDM
-
Check for external damage such as deformation, scratch, crack, peeled paint, etc.
-
Check that SDM cannot be installed properly due to a cause in itself.
-
Check that connector or lead wire of SDM has a scorching, melting or damage.
-
Check SDM connector and terminals for tightness.
-
Check SDM sets a diagnostic trouble code. Refer to DTC Check: Except Advanced Air Bag and the diagnostic table leads to a malfunctioning
SDM.
-
Instrument panel member and reinforcement
-
Check for any distortion, bending, cracking or other damage.
-
Check instrument panel for cracks or deformities.
