Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Valve Guide Seal > Component Information > Service and Repair

Page 1
background image

Valve Guide Seal: Service and Repair

Valve Oil Seal: Removal and Installation

REMOVAL

1) Turn crankshaft until the cylinder requiring new oil seals is at TDC. This will prevent valve from dropping into cylinder.
2) Remove camshaft relating to valve oil seal to be removed. 
3) Remove valve lifters. 
4) Remove valve collet, valve spring retainer and valve spring using Tool.

CAUTION:
When working, take care not to damage valve lifter holes.

Tool numbers 

: KV10116200 (J-26336-B)
: KV10115900 (J-26336-20)
: KV10109220 (-)

^

Compress valve spring using Tool attachment, adapter. Remove valve collet with magnet hand.

5) Remove valve oil seal using Tool.

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Valve Guide Seal > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]