Equator 2WD V6-4.0L (2009)
CAUTION: Do not start engine while checking oil level.
3. Set a gasket on the filler plug and install it to the transmission. Tighten the filler plug to the specified torque. Refer to [Transmission Assembly:
Disassembly and Assembly].
CAUTION: Do not reuse gasket.
FS5R30A Type
M/T Oil Changing [FS5R30A]
DRAINING
1) Start the engine and let it run to warm up the transmission.
2) Stop the engine. Remove the transmission drain plug and drain the oil.
3) Set a gasket on the drain plug and install it to the transmission. Tighten the drain plug to the specified torque.
CAUTION:
Do no reuse gasket.
FILLING
1) Remove the filler plug. Fill with new oil until oil level reaches the specified limit near the filler plug hole.