Equator 2WD V6-4.0L (2009)
Oil grade and Viscosity:
Refer to [Recommended Fluids and Lubricants].
Oil capacity:
Refer to [Recommended Fluids and Lubricants].
2) After refilling the oil, check oil level. Set a gasket to the filler plug, then install it to the transmission. Tighten the filler plug to the specified torque.
CAUTION:
Do not reuse gasket.
FS6R31A Type
M/T Oil Changing [FS6R31A]
DRAINING
1) Start the engine and let it run to warm up the transmission.
2) Stop the engine. Remove the transmission drain plug and drain the oil.
3) Set a gasket on the drain plug and install it to the transmission. Tighten the drain plug to the specified torque.
CAUTION:
Do not reuse gasket.
FILLING
1) Remove the filler plug. Fill with new oil until oil level reaches the specified limit near the filler plug hole as shown.