Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Powertrain Management > Computers and Control Systems > Information Bus > Component Information > Testing and Inspection > Initial Inspection and Diagnostic Overview > Page 1824

Page 18
background image

3. Based on information received from "Bus check", place a check mark on the known good CAN communication line between ECM and IPDM-E.

a. Through the previous procedure, the circuit between ADP splice and TCM has the most amount of lines (shade 3-a in the figure below).
b. Place a check mark on the known good lines to establish the error circuit.

Reception item of "IPDM-E": On "ECM", "OK" is indicated. IPDM-E communicates normally with ECM. Put a check mark on the normal
circuit between ECM and IPDM-E (check mark 3-b in the figure below).

Powertrain Management > Computers and Control Systems > Information Bus > Component Information > Testing and Inspection > Initial Inspection and Diagnostic Overview > Page 1824

[PREV PAGE] [NEXT PAGE]