Equator 2WD V6-4.0L (2009)
Powertrain Management > Computers and Control Systems > Information Bus > Component Information > Testing and Inspection > Initial Inspection and Diagnostic Overview > Page 1825
4. Through the above procedure, the error is detected in the TCM branch line (shaded in the figure below).
NOTE: For abbreviations, refer to [How to Use This Section].
5. Perform the inspection for the detected error circuit. For the inspection procedure, refer to "MALFUNCTION AREA CHART". See: Component
Tests and General Diagnostics/Malfunction Area Chart
|[PREV PAGE] [NEXT PAGE]|