Equator 2WD V6-4.0L (2009)
Powertrain Management > Computers and Control Systems > Information Bus > Component Information > Testing and Inspection > Initial Inspection and Diagnostic Overview > Page 1832
6. The circuit which has the most amount of lines are the possible cause. Error is detected from ABS actuator and electric unit (control unit) branch
line (shaded in the figure below).
NOTE: For abbreviations, refer to [How to Use This Section].
7. Perform the inspection procedure for the possible cause. Refer to "MALFUNCTION AREA CHART". See: Component Tests and General
Diagnostics/Malfunction Area Chart
|[PREV PAGE] [NEXT PAGE]|