Equator 2WD V6-4.0L (2009)
Powertrain Management > Computers and Control Systems > Information Bus > Component Information > Testing and Inspection > Initial Inspection and Diagnostic Overview > Page 1831
5. Fill out the diagnosis sheet based on information from step 4.
a. The ABS warning lamp turned ON and speedometer did not move: Assume that a possible cause is no communication between M&A and
ABS. Draw a line between M&A and ABS. (Line 5-a in the figure below).
b. The tachometer moved normally: Put check marks between ECM and M&A. The circuit between ECM and M&A is functioning properly
(check marks 5-b in the figure below).
|[PREV PAGE] [NEXT PAGE]|